women discharge

How to clean the drain of the washing machine



Nowadays, modern technology allows us to perform jobs and procedures in a short time. This facilitates us for a long time, just think of the aid that is offered to us by the use of household appliances. In fact, over the years, more and more household appliances have appeared in our daily lives, which have also changed our lifestyle in a certain way. However, their effectiveness is also dictated by their efficiency. So it is important, in order to keep them always working perfectly, to safeguard them, using them in an optimal and appropriate manner. In this guide we will mainly focus on the washing machine. We will see precisely how to clean the drain of the same.

 Generally the washing machines have, on the front part, a little door with a cap inside. Unscrew it but be careful because when opened, it will release a considerable amount of dirty water, then prepare buckets and rags. Through this procedure, you will be able to determine if the discharge is dirty or not depending on the amount of sludge inside the filter.
The presence of this filter cap is still very useful because it allows you to remove any small object that, by mistake, is thrown into the washing machine and then ends up getting stuck.

After completing this routine cleaning procedure, proceed by checking all the exhaust pipe.
Usually it is a rubber hose placed on the back of the washing machine, which goes directly into the sewage outlet; It is always good to unscrew this tube to check it as there may be socks, pieces of paper or other inside.
Continue now with the washing of the tube: once unscrewed, you can introduce water inside to check if it flows freely. If, on the other hand, the pipe is welded to the washing machine or you do not know how to remove it, it is advisable to use a long-line tool, not too sharp, to avoid damaging the pipe itself. A wire will be fine, as long as it has a rubber stopper at its end. You will have to thread this wire inside the tube to free it from any unwanted objects.

Introduction

Nowadays, modern technology allows us to perform jobs and procedures in a short time. This facilitates us for a long time, just think of the aid that is offered to us by the use of household appliances. In fact, over the years, more and more household appliances have appeared in our daily lives, which have also changed our lifestyle in a certain way. However, their effectiveness is also dictated by their efficiency. So it is important, in order to keep them always working perfectly, to safeguard them, using them in an optimal and appropriate manner. In this guide we will mainly focus on the washing machine. We will see precisely how to clean the drain of the same.

Generally the washing machines have, on the front part, a little door with a cap inside. Unscrew it but be careful because when opened, it will release a considerable amount of dirty water, then prepare buckets and rags. Through this procedure, you will be able to determine if the discharge is dirty or not depending on the amount of sludge inside the filter.
The presence of this filter cap is still very useful because it allows you to remove any small object that, by mistake, is thrown into the washing machine and then ends up getting stuck.

After completing this routine cleaning procedure, proceed by checking all the exhaust pipe.
Usually it is a rubber hose placed on the back of the washing machine, which goes directly into the sewage outlet; It is always good to unscrew this tube to check it as there may be socks, pieces of paper or other inside.
Continue now with the washing of the tube: once unscrewed, you can introduce water inside to check if it flows freely. If, on the other hand, the pipe is welded to the washing machine or you do not know how to remove it, it is advisable to use a long-line tool, not too sharp, to avoid damaging the pipe itself. A wire will be fine, as long as it has a rubber stopper at its end. You will have to thread this wire inside the tube to free it from any unwanted objects.

Finally, to rinse and sanitize the inside of the washing machine, try to periodically perform a washing cycle at the maximum temperature with bleach or with bicarbonate and lemon.
In this way all the germs and bacteria will be eliminated and also the limescale, a little at a time, will be consumed. From the next laundry you will surely notice the difference!